The Pilot L4 represents the best solution for those wishing to fully automate the flying probe test process, eliminating the need for continuous operator presence in order to manage the test system. Thanks to its integrated SMEMA conveyor, the Pilot L4 can be combined with automatic load/unload magazines or lines, executing in-circuit, functional and visual tests of electronic boards in a completely automated mode, integrating all its measurement capabilities and techniques in a single test program. 

The horizontal architecture of the Pilot L4, essential to convey and house the boards into the test system, also enables the use of frames/carriers and/or support fixtures, which facilitate the use of fixed channels, Openfix  sensors and power connections on the side opposite to the probes, to maximize test program fault coverage.
These fixed resources are positioned on the elevator platform under the UUT, which enables them to be applied in the automatic mode with no need for further operator intervention.  
Its 610 x 540mm test area allows Pilot L4 to handle even large boards or panels, and the high expandability of the ATE rack can hold up to 1,032 analog channels, connectable to an external bed of nails fixture coupled to the system.
The unique VIP platform and the VIVA management software allow the user to run the same test program on the Pilot L4 using the flying probes or a bed of nails fixture, depending on the production requirements.